BNXXR - 88542 LOCKBOND MULTI-PURPOSE CONSTRUCTION ADHESIVE

  • MSDS: BNXXR
  • Manufacturer: MACKLANBURG DUNCAN
  • Product Name: 88542 LOCKBOND MULTI-PURPOSE CONSTRUCTION ADHESIVE
  • National Stock Number: 8040-00F024573
Product Identification

Product ID:88542 LOCKBOND MULTI-PURPOSE CONSTRUCTION ADHESIVE
MSDS Date:01/17/1991
FSC:8040
NIIN:00F024573
MSDS Number: BNXXR

Responsible Party
MACKLANBURG-DUNCAN
4041 NORTH SANTA FE
OKLAHOMA CITY, OK 73125
US

Emergency Phone: (405) 528-4411

Info Phone: (405) 528-4411

Cage: 82464

Contractor
MACKLANBURG-DUNCAN
OKLAHOMA CITY, OK 73118-0188 US

Telephone: 800-654-8454 / 405-528-4411

Cage: 82464

Ingredients

ETHYLENE GLYCOL, GLYCOL

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <2%

ACGIH TLV: C 127 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: <3%

OSHA PEL 100 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, BREATHLESSNESS,
DROWSINESS & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, BREATHLESSNESS,
DROWSINESS & NAUSEA.

First Aid

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:100F
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS IN POSITIVE
PRESSURE MODE & FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:IRRITATING OR TOXIC GASES & AEROSOLS MAY
BE PRODUCED DURING BURNING.

Accidental Release

Spill Release Procedures:SCRAPE INTO CONTAINERS & DISPOSE.

Handling

Handling and Storage Precautions:DON'T STORE NEAR IGNITION SOURCES.
STORE 40-120F. DON'T FREEZE. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT INGEST. AVOID SKIN CONTACT & USE IN WELL
VENTILATED AREAS.

Exposure Controls

Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR.
Ventilation:RECOMMENDED
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health
BOILING POINT: 300-400F (MINERAL SPIRITS). DATA FOR VAPOR DENSITY,
FLASH POINT, LEL & UEL IS FOR MINERAL SPIRITS.

Chemical Properties

Boiling Pt:B.P. Text:SEE SUPP.
Vapor Pres:NONE
Vapor Density:4.8
Spec Gravity:12.7
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT TAN MASTIC W/SLIGHT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, FLAMES, FREEZING
Hazardous Decomposition Products:CO2, CO

Disposal

Waste Disposal Methods:LANDFILL IN ACCORDANCE W/LOCAL, STATE, & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.